Product Description
Bedec Multi Surface Paint is a paint for use both inside and outside with a built in universal primer.
A proven water-based paint that resists flaking or peeling due to it’s outstanding flexibility. Easy to apply directly onto almost anything, including (but not limited to) plastic, wood, metal, cladding, brick, UPVC, MDF, and tiles! As it is a water-based product it all but eliminates yellowing with age, and it makes it very convenient to clean up using water.
Choose from a range of colours in Matt, Satin and Gloss finishes. If you cannot see the colour or size you require please send us an email. Please note certain colours are only available in some finishes and sizes.
Surface preparation
Ensure the surfaces to be painted are clean, dry and free from dust, dirt, grease and wax
Remove all loose and defective paint
Remove and treat any Algal, mould and fungal growths with a fungicidal wash. Smooth glossy surfaces should be lightly abraded to provide a key
For specific surface preparation instructions please refer to the data sheet below
Directions for use
Stir well and check colour before use in case any of the product has settled in the tin.
Apply with a brush, roller, conventional H.V.L.P or airless spray
Do not apply at air or surface temperatures below 8°C, when likely to rain before the paint has fully dried or above 30°C as this may cause uneven drying.
Apply two to three coats to sealed surfaces allowing each coat to dry thoroughly
Do not over spread
Recoatable after approximately 4 hours
Tips for use
Be mindful that spraying can reduce the coverage rate depending on the type of spray equipment you are using
Clean up immediately after use with warm soapy water. Ensure when using a roller sleeve that it is washed out thoroughly and left slightly damp before use, to remove loose fibres, dust and to create a liquid barrier between the paint and the roller to avoid the paint absorbing into the roller.
Key Benefits
- Resists flaking and cracking
- Chalks much less
- No special thinners required
- Low VOC
- Alkali resistant
- Heat resistant up to 80 Degrees Celsius