Bradite One Can Matt

Bradite One Can is a water thinned primer/finish coat with excellent stain blocking, adhesion and anti-corrosive properties.

One Can is ideal for a range of surfaces such as metals, plastics (inc. melamine and uPVC), ceramic tiles, glass and wood.

Can be used on the following stains: water damage, knots, smoke damage, tannin bleed, rust and nicotine stains.

Available in White or Black.

Surface preparation

Substrate should be free of contamination, grease, oil, dust and completely dry before application.

Loose contamination should be removed.

Intact areas of existing coatings should be roughened by manual or mechanical sanding.

Cracks and pits should be filled using a suitable filler before painting.

For full preparation and application details please see technical data sheet

Directions for use

Stir well and check colour before use in case any of the product has settled in the tin.
Apply with a brush, roller, conventional or airless spray Do not apply in temperatures below 10C
Apply two to three coats allowing each coat to dry thoroughly
Recoatable after approximately 1 hour

Tips for use

Be mindful that spraying can reduce the coverage rate depending on the type of spray equipment you are using
Clean up immediately after use with warm soapy water. Ensure when using a roller sleeve that it is washed out thoroughly and left slightly damp before use, to remove loose fibres, dust and to create a liquid barrier between the paint and the roller to avoid the paint absorbing into the roller.

Key Benefits

• Low Odour
• Excellent adhesion
• Stain blocking
• Suitable for a range of surfaces interior & exterior
• Quick drying

Technical Information