Polyvine Decorators Varnish

Directions for use:

• Wet the surface with fresh clean water.
• Ensure the product is well mixed, then apply, thinly, 2-3 coats of varnish, allowing 2-3 hours between coats to allow surface to properly cure.
• If any dust or other abnormalities appear in between coats, abrade with 0000 Wire wool or Sandpaper P400 grade or higher, abrade very lightly just to remove abnormalities, clean surface and apply another coat

Tips for use:

• Ensure product is well mixed, DO NOT SHAKE.
• Use at least 2 coats.
• Ensure surface is properly prepared before applying product.

Ideal uses for Polyvine Decorators Varnish:

• Using as a clear coat after coloring wood with wood dye.
• Changing finish of surface (eg using flat matt varnish on top of satin woodstain).
• Protect surface from discolouring from sunlight.
• Waterproofing surface.
• Protecting surface from finger marks, scuff marks and other traffic that would harm surface.
• Breathe new life into an old piece of furniture.

Key benefits:

• Easy to apply.
• Quick Drying.
• Waterproof finish.
• Available in 3 different finishes based on preference.
• Durable and long lasting.